Long Wall Antenna Mount, 430 Stainless Steel Mast with Support Brace, 90° Elbow & Extension Pipes

Price: 66,03 $

Extend antenna placement beyond walls and eaves with a 430 stainless steel mast, extension pipes, 90° elbow and triangular brace. For TV antennas and outdoor WiFi; Starlink adapter required.

Share
Varenummer: Long -Antenna-Straight-Mount-Brace-Sliver

EOQO 430 Stainless Steel Long Wall Antenna Mount with Support Brace

Create additional clearance for outdoor antennas and networking equipment with the EOQO long wall antenna mounting kit. Its 430 stainless steel mast combines a right-angle elbow, modular extension pipes and an adjustable diagonal brace, allowing compatible equipment to be positioned farther from walls and roof edges.

REINFORCED TRIANGULAR SUPPORT

The additional diagonal support brace joins the long horizontal arm to another suitable attachment point, creating a triangular support arrangement. This second connection can help limit swaying, sagging and movement compared with an unsupported extension arm. Actual performance depends on correct anchoring, installation geometry, attached equipment and local wind conditions; no universal weight or wind-load rating is claimed.

LONG-WALL REACH AND 90-DEGREE ELBOW

The 90° elbow redirects the extended arm into an upright mast for compatible clamps. Extension pipes and adjustable connection points make it easier to plan around roof overhangs, gutters and nearby obstacles. The useful horizontal clearance depends on the assembled configuration; measure the wall-to-eave distance and device clearance before choosing the mounting position.

430 STAINLESS STEEL CONSTRUCTION

The mast uses ferritic 430 stainless steel for a durable outdoor mounting structure with corrosion resistance. This stainless steel grade is naturally magnetic: attraction to a magnet is normal and does not indicate ordinary painted iron. Like other exterior metal hardware, it still benefits from periodic inspection, especially in coastal or highly corrosive environments.

ADJUSTABLE BRACE AND BOLT-LOCKING CONNECTIONS

Pre-drilled adjustment positions and locking bolts help align the horizontal arm and diagonal brace before final tightening. Position the mast as required by the attached device, fully seat extension joints and secure the fasteners evenly. Avoid overtightening connections or crushing the pipe sections.

VERSATILE OUTDOOR APPLICATIONS

  • Outdoor over-the-air TV antennas and compatible antenna clamps

  • Weather stations and monitoring sensors

  • Point-to-point wireless bridges and CPE equipment

  • Outdoor WiFi access points, routers and extenders

  • Compatible 4G/5G LTE antennas and mast-mounted accessories

STARLINK ADAPTER REQUIRED

This is a general-purpose antenna mounting mast, not a direct-fit Starlink dish bracket. For Starlink use, purchase a model-specific pipe adapter separately and check the adapter's approved pole diameter and your dish version. Starlink terminals, antennas and electronic devices are not included.

INSTALLATION GUIDANCE

  1. Select sound structural attachment locations for the main wall base and diagonal support brace.

  2. Secure the wall base with appropriate anchors or fasteners for the substrate.

  3. Assemble the horizontal arm, 90° elbow and extension pipes, ensuring each joint is seated.

  4. Connect the adjustable support brace to the main arm and the second structural attachment point.

  5. Align the upright mast and tighten locking bolts without deforming the tubes.

  6. Check roof, gutter, power-line and cable clearances; seal exterior penetrations as required.

Do not rely on thin siding, gutters or decorative trim alone for anchoring. Assess equipment weight, projected wind area and building conditions before installation. Seek professional advice for exposed or elevated sites, and avoid use during severe weather.

PRODUCT DETAILS

Brand: EOQO

Product type: Long wall antenna mounting kit

Material: Ferritic 430 stainless steel

Support: Adjustable diagonal triangular brace

Mast design: Horizontal extension arm, 90° elbow and modular pipes

Adjustment: Pre-drilled connection points and locking bolts

Applications: Compatible outdoor antennas, weather stations and wireless equipment

Starlink: Separate model-specific adapter required

BEFORE ORDERING

Verify wall and eave clearance, mast-to-device clamp fit, structural fixing points and the actual included hardware for this SKU. Check the product photos and packing list for all supplied components.

  • Reference
    Long -Antenna-Straight-Mount-Brace-Sliver
  • In stock
    1000 Items
Security policy
Secure Checkout & Data Protection
Delivery policy
Fast & Reliable Worldwide Shipping
Return policy
Easy Returns & Hassle-Free Support

Comments (0)

No customer reviews for the moment.

8 other products in the same category

Viewed products

Loading...
Back to top