EOQO Outdoor WiFi Extender for Starlink Gen 3/Mini/V5, AX1800 WiFi 6 AP/Repeater, IP65 PoE, 300 m (984 ft)

Price: 169,99 $

EOQO Starlink WiFi extender and WiFi 6 outdoor access point: AX1800 dual-band, IP65 PoE, AP/repeater modes. Connect a wireless bridge Slave to broadcast WiFi at barns, farms or RV sites.

Share
Varenummer: 1800Mbps-4Antennas

Expand Outdoor WiFi for Starlink, Yards and Remote Buildings

The EOQO AX1800 Outdoor WiFi Extender combines a dual-band WiFi 6 outdoor access point (AP) and wireless repeater for broader WiFi coverage. It is designed for Starlink-connected homes, farms, barns, RV areas and campsites. It can also connect to the Ethernet output of a point-to-point wireless bridge Slave unit to broadcast local WiFi at a distant building.

KEY FEATURES

• AX1800 Dual-Band WiFi: Up to 574 Mbps on 2.4 GHz and 1224 Mbps on 5 GHz, with four external antennas. These are advertised wireless link rates, not guaranteed internet download speeds.

• AP and Relay Modes: Use AP mode with an Ethernet network feed for outdoor WiFi coverage, or Relay/Repeater mode to rebroadcast a compatible existing wireless signal. A wired AP connection is generally preferable where available.

• Starlink Compatibility: Designed for Starlink Gen 3, Standard 4, 4X, Enterprise, Mini and V5 network setups. The router must provide a compatible Ethernet LAN connection for AP mode or a compatible WiFi source for Relay mode. An Ethernet adapter or additional networking equipment may be required for some installations.

• Wireless Bridge Slave-Side WiFi: Connect the LAN output of a compatible bridge Slave to this PoE-powered outdoor AP to provide WiFi for phones, laptops, security cameras and other wireless clients at the remote site. The bridge transmits data between locations; the AP supplies local client WiFi.

• Outdoor-Ready IP65 Housing: Dust-resistant and protected against water jets. Install with weather-protected cable connections and follow the mounting instructions. IP65 does not mean submersible.

• PoE Installation: Power and data share one Ethernet cable between the compatible PoE power source and the AP, reducing outdoor cabling.

• Multiple Wireless Clients: Advertised support for up to 160 connected devices; usable capacity depends on bandwidth, device activity and signal quality.

WHERE TO USE IT

Extend Starlink WiFi to gardens, yards, patios, farmyards, workshops, barns, RV parking spaces, campgrounds and outdoor camera locations. For detached buildings, a separate point-to-point wireless bridge pair can carry the connection to the building, while this outdoor WiFi access point serves nearby client devices.

IMPORTANT: REAL-WORLD RANGE AND PERFORMANCE

Advertised outdoor WiFi coverage is up to 300 m (984 ft) in favorable, open conditions. This figure is theoretical, not a guaranteed service distance. Coverage, upload/download speed and stability depend on terrain, trees, walls, metal structures, device antennas, nearby WiFi interference and weather. The receiving phone or camera must also be able to send a signal back to the AP.

Shorter outdoor links are generally less demanding than long-distance links, but obstructions and interference can still cause poor performance. For longer distances, mount equipment high enough to obtain a clear path above ground and obstacles. A dedicated wireless bridge needs proper line of sight and sufficient clearance between antennas; its advertised transmission range is also theoretical and may decrease markedly in rain, difficult terrain or noisy radio environments. Test signal quality at the intended location before permanent installation. This AP does not replace a dedicated multi-kilometer point-to-point bridge.

CONNECTION OPTIONS

  1. Wired Starlink AP: Starlink router Ethernet LAN -> PoE injector LAN -> injector PoE output -> EOQO outdoor AP. Power the injector as specified.
  2. Wireless Relay: Position the powered AP where it can receive a strong, compatible Starlink WiFi signal, then configure Relay/Repeater mode.
  3. Bridge Slave-Side AP: Starlink LAN -> bridge Master -> wireless link -> bridge Slave Ethernet output -> AP PoE injector LAN -> EOQO outdoor AP. Use the appropriate power supply for each device.

TECHNICAL DETAILS

Wireless: 2.4 GHz / 5 GHz dual band; advertised 574 + 1224 Mbps; four external antennas.
Outdoor protection: IP65. Advertised WiFi coverage: up to 300 m (984 ft).
Operation: Access Point (AP) / Relay (Repeater); Power: PoE.
Advertised client capacity: up to 160 devices.
Product reference: 1800Mbps-4Antennas.

PACKAGE INFORMATION

1 x EOQO outdoor WiFi extender/access point with four external antennas. The current listing does not separately confirm the included PoE injector, power cord, mounting hardware or printed manual; verify the selected package contents before ordering. Prepare a suitable Ethernet cable for your installation distance. Starlink equipment, wireless bridge Master/Slave units and wireless client devices are not included unless explicitly listed.

  • Brand
  • Reference
    1800Mbps-4Antennas
  • In stock
    1000 Items
Security policy
Secure Checkout & Data Protection
Delivery policy
Fast & Reliable Worldwide Shipping
Return policy
Easy Returns & Hassle-Free Support

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Viewed products

Loading...
Back to top