Prubovi CPE750 is a long-distance 5.8G wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks. The transmission distance can reach up to 3km. CPE750 Video Bridge Transmission usually consists of two devices in AP and Client mode respectively. On the Client-side (Receiving side) CPE connects with IP Camera, at the AP side (Transmitting side) CPE connects with a video recorder. The AP can be receiving wireless data transmitted from multiple Clients, and it is easy and convenient for centralized management of the remote equipment. CPE is widely used in highways, reservoir river monitoring, elevator monitoring systems, site crane monitoring systems, port terminal monitoring systems, marine aquaculture monitoring systems, and so on. Point to point extend network Wi-Fi range, extend the network in the house to your barn, garage, church, warehouse through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.

Package Included:

2 * CPE750 Bridge

2 * POE Adapter (24V)

2 * Cat 5e Network Cable

2 * Metal Hoop

1 * User Manual

Applications Case

Installed this between two buildings across the street from each other. We had two internet bills - now we have just ONE. Installation was easy. Setup was easy too. Just make sure one unit has the switch set to A and the other has it set to B. At each end plug in the POE (power over ethernet adapter) to the wall. Then one ethernet cable connects the POE adapter and the bridge unit and a second ehternet cable connects the POE adapter and the router (or modem). We have 55mbps service and are getting 50 - 59 mbps through the bridge.

Extreme Distances Even in Extreme Weather

This wireless bridge is designed to perform, even in harsh environments. Its IP65-rated waterproof and dustproof casing ensures it can withstand harsh outdoor environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat and humidity.

Easy Installation

You can fix the point-to-point bridge on the bracket (ASIN: B0BB2T8T4S) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the Prubovi Universal Bridge Bracket.

Lane Monitoring Application

Display your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs.

Switch Master-slave Bridge

Point wireless bridge switches the master and slave bridges through the A-B button, A represents the master bridge, and B represents the slave bridge. In point-to-multipoint, take one of the bridges as A, and the other bridges as B, and then set them to the same pairing character to complete the point-to-multipoint pairing.