Long Eave Antenna Mount with Support Brace, 430 Stainless Steel Mast, 90° Elbow & Extension Pipes

Price: 66,03 $

Extend antenna placement past deep eaves with a 430 stainless steel mast, 90° elbow, extension pipes and adjustable triangular support brace. Upward or downward setup; Starlink adapter required.

Share
Artikelnummer: Long -Antenna-Bend-Mount-Brace-Sliver

EOQO 430 Stainless Steel Long Eave Antenna Mount with Support Brace

Give outdoor antennas and networking equipment more room around deep roof overhangs with this adjustable long-eave mounting kit. It combines a 430 stainless steel mast, 90-degree elbow, modular extension pipes and diagonal support brace for a configurable wall or eave installation. Use it with compatible antenna clamps and device-specific mounting accessories.

REINFORCED TRIANGULAR SUPPORT

The adjustable diagonal brace connects the extended mounting arm to another suitable structural attachment point, helping form a triangular support arrangement. This added connection can help reduce unwanted mast movement and sagging when the entire assembly is installed correctly. The brace does not replace proper wall anchors or establish a certified wind-load or weight rating.

EXTRA CLEARANCE WITH A 90-DEGREE ELBOW

The right-angle elbow and connectable pipe sections help position the upright mast beyond eaves, gutters and nearby roof edges. The modular design provides installation flexibility when a short fixed wall bracket would leave equipment too close to the building. Measure both horizontal projection and vertical clearance before choosing the layout.

ADJUSTABLE, UPWARD OR DOWNWARD MOUNTING

Configure the components for an upward- or downward-facing arrangement where the building structure and connection geometry permit. Position the main wall base, select the extension configuration and align the diagonal brace before tightening the locking bolts. Keep the final mast vertical when required by the antenna or device manufacturer.

430 STAINLESS STEEL CONSTRUCTION

Made from ferritic grade 430 stainless steel for a durable metal mast with corrosion resistance suited to appropriate outdoor environments. Grade 430 is naturally magnetic; a magnet sticking to the metal is normal and does not mean it is painted iron. Stainless steel is not maintenance-free, particularly in coastal or chemically corrosive locations, so inspect surfaces and hardware regularly.

COMPATIBLE OUTDOOR EQUIPMENT

This antenna mast system can support appropriately sized mounting accessories for over-the-air TV antennas, weather stations, wireless bridges, outdoor WiFi access points, WiFi extenders and 4G/5G LTE antennas. Check your device's clamp dimensions, installation instructions, weight and exposed wind area. The mount only provides positioning; it does not directly boost signal strength.

STARLINK ADAPTER REQUIRED

A Starlink dish does not attach directly to this general-purpose antenna mast. A compatible, model-specific pipe adapter must be purchased separately. Confirm the adapter's accepted pipe size and compatibility with your exact Starlink terminal. The dish, router and other electronic equipment are not included.

INSTALLATION GUIDANCE

  1. Select structurally sound wall or eave-area anchoring points appropriate for the completed assembly.

  2. Attach the primary base with fasteners rated for the mounting surface.

  3. Assemble the horizontal section, 90-degree elbow and extension pipes, fully seating all joints.

  4. Attach and adjust the diagonal brace to form the reinforcing triangle.

  5. Tighten all locking bolts evenly and check the position, clearance and security of the completed mast.

Do not rely on thin siding, decorative trim or gutters as the only support. Avoid overtightening connections, which may damage or distort tubing. Assess wind exposure and follow relevant building and electrical safety requirements; consult a qualified installer where necessary. No universal load capacity or severe-weather performance is claimed.

PRODUCT DETAILS

Brand: EOQO
Type: Long eave antenna wall-mount kit
Material: Ferritic 430 stainless steel
Main components: Mounting base, extended mast sections, 90-degree elbow and adjustable support brace
Adjustment: Modular extension pipes and locking connection points
Mounting orientation: Upward or downward where structurally suitable
Applications: Compatible TV antennas, weather stations and outdoor wireless equipment
Starlink compatibility: Model-specific pipe adapter required, sold separately

BEFORE ORDERING

Verify the exact mounting dimensions, equipment clamp fit, wall-to-eave clearance and included fasteners for this SKU. The safe installation depends on the complete bracket assembly, attached equipment and building structure.

  • Reference
    Long -Antenna-Bend-Mount-Brace-Sliver
  • In stock
    1000 Items
Security policy
Secure Checkout & Data Protection
Delivery policy
Fast & Reliable Worldwide Shipping
Return policy
Easy Returns & Hassle-Free Support

Comments (0)

No customer reviews for the moment.

8 other products in the same category

Loading...
Back to top