Functions:
G618/619 RF detector is made by new generation wireless technology, mainly designed to detect GSM bug, wireless audio bug, GPS tracker, mobile phone secret communication, spy WiFi camera, cheating device etc.
The function can meet military/police surveillance, it can detect electrical source, so will prevent you and your family from the damage of electromagnetic radiation. It adopts digital receiving mode, which is different from other detectors.
First is widen the detection frequency domain, avoid the disturbance from clutter signal of life.
Second is improved the sensitivity, the advantage is that no matter how strong the transmitting signal is, it can easily locate it by adjusting the switch.
So it is the most advanced portable wireless signal detection equipment. The normal wireless detector can not detect CDMA/4G/5G signal, if you dial it via CDMA 2100Mhz/4G 2300Mhz/5G 3600Mhz,the traditional detector never alarm.
Because CDMA/4G/5G mobile phone agreement was invented by the U.S.Military, it is a radio frequency hooping technology, was called code division multiple access, and the transmission power is small, it is hard to detect.
G618/619 can accurately identify the CDMA/4G/5G mobile communication protocol of monitoring equipment.
Overview:
Indicator LED Light: there are totally 10 LED lights, the first to the tenth LED bar is shown as 10 levels of the sensitivity, when a light is turned on, it means the level of the sensitivity is active, when all LED lights are flashing, it means the sensitivity is reaches the maximum value.
Button: Press and hold it for 3 seconds to change the alarm mode to vibrating, press and hold 3 seconds again, it will change back to sound alarm, works in cycle.
Power Switch & Sensitivity knob:
Turn it to right to power on and increase the sensitivity, turn it to left to decrease the sensitivity and power off.
Antenna:
The G618 has three antenna connectors, they are marked as “GSM”,“RF”,“5.8”, must check and match it one by one before installation.
USB Port: Charging socket
Instructions:
Power ON: Turn the power switch by clockwise to power on, the indicator light will turn on, when rotate it to the end, all LED lights will flash, and the device prompts "beep”, “beep" voice alarm rapidly.
Power OFF: Turn the power switch to the end by counterclockwise, the LED light will turn off, and the device power off.
How to use?
Hold the device and the antenna forward to the target area, when receive signals, the device will prompt sound alarm and indicator LED lights will flash.
How to adjust the sensitivity and find the object?
The device have total 10 levels of the sensitivity, adjust the power switch to appropriate sensitivity level, if the environmental signal is strong, you need to decrease the sensitivity, normally we suggest you set it to level 7 or 8.
When close to the target, the 10 indicator LED lights bar will bright and flash, and the device prompts "beep”, “beep" sound alarm, it will alarm as rapidly when it is close to the target. You can try different sensitivity levels to find out the suspicious target.
Note:
This product is highly sensitive, it can receive wireless signals from cell phone base stations, television broadcasting stations on the road, if you need to use this device to find out the vehicle GPS tracker, please drive your car/truck to a weak signal area, and turn your cell phone to airplane mode, then start detection job, it will have better performance.
If the device always alarm and there is no any suspicious object, please check:
1. Your own electronic device has connection to the network station(you need to turn it off)
2. The target device may be in another room or at the other side of the wall, or one person who is near to the room makes phone calls.
3. Your place is too close to the network station.
Please visit https://www.eoqo.com to find operation videos and more guides.
Application:
1. Whether wireless bug or GPS location tracking is installed in your car or office?
2. Whether your cell phone is eavesdropped or abnormal(transmit signal when cell phone in standby mode without any reason)
3. Is there any base station radiation around your working environment and residential buildings?
4. SMS send and receive signals, mobile internet, mobile phones bugs
5. Detect the wireless network signals, mobile phone base stations and wireless monitoring system.
6. Does household appliances do harm to human body, such as microwave ovens.
7. Are there any suspicious wireless signals in the environment?
8. Used for the hotel, bathroom, entertainment, locker room or political authority, etc.
10. Mahjong table coincidence with the action of the radio waves.
11. Used for mortgage cars, used cars, pawn shops, guarantee companies, small generation companies, information financiers companies, etc.
Parameters:
Frequency Range: 100MHz - 2700MHz
Detect Dynamic Range: >73db
Detection Sensitivity: <0.03mw
Detect Range: 1.2GHz wireless camera: 10m², 2.4GHz wireless camera: 15m²(transmitter: 10mw)
Magnetic: 10 - 20mm
Pinhole Camera Lens: 10 - 20 meters
Mobile: 2G,3G,4G,5G: 10m²
Battery: 3.7V 1000Mah
Working Current: 60Mah
Working Time: 8 - 12 hours
Weight: 120g
Warning:
Application: Please strictly abide relevant regulations and laws, This product should not be used for any illegal purpose. The user is fully responsible for its use.
Battery: If this product has not been used in a long period of time, you need to fully charge it before use.
Operating Temperature: -10 - 40 degree
Operating Humidity: 20% - 80%
This product is not waterproof, so do not get it wet or use it in a humid environment.
Other Matters: Do not use this product in strong magnetic or strong electric powered environments.