Heavy Duty Long Eave Antenna Mount with Support Brace, Adjustable Wall Mast, 90° Elbow & Extension Pipes
Mount antennas beyond deep eaves with an adjustable painted-iron wall mast, 90° elbow, extension pipes and diagonal support brace. Upward or downward setup; Starlink requires a separate adapter.
EOQO Long Eave Antenna Wall Mount with Reinforced Support Brace
Position outdoor antennas and wireless equipment beyond roof overhangs with this long-eave wall mount. A telescoping arm, 90-degree elbow, extension pipes and diagonal brace create an adjustable mounting structure.
REINFORCED TRIANGULAR SUPPORT
The auxiliary support brace adds a second structural connection to the main mounting arm. When secured to suitable structural surfaces, the brace helps limit movement. Proper anchors, mounting geometry and assessment of wind exposure remain essential; no certified wind-load upgrade is claimed.
ADJUSTABLE REACH FOR LONG EAVES
Multiple adjustment positions help set the reach and brace angle around eaves, gutters and roof edges. Measure available clearance and device dimensions before ordering; not every overhang can be cleared.
90-DEGREE ELBOW AND MODULAR MAST
The 90-degree elbow redirects the mounting pipe to create an upright section for compatible antenna clamps. Connectable extension pipes allow the mast arrangement to be adapted to the available space. Seat each section fully; overtightening may deform the nominal 1 mm-wall tubing.
UPWARD OR DOWNWARD INSTALLATION
The modular design supports upward-facing and downward-facing mounting layouts where the structure and available clearance allow. Choose the orientation that clears roofing, gutters, cables and obstructions while keeping fasteners accessible.
PAINTED-IRON OUTDOOR CONSTRUCTION
The metal mounting components are made from painted iron with a protective exterior finish. Iron is naturally magnetic. The coating helps protect the surface but is not rustproof. Inspect paint and fasteners regularly, especially in coastal environments.
VERSATILE MAST-MOUNTED APPLICATIONS
Suitable for compatible outdoor TV antennas, weather stations, point-to-point wireless bridges, CPE equipment, WiFi access points and extenders, and 4G/5G antenna systems. Confirm each device's clamp size, mounting instructions, weight and exposed wind area before installation. This bracket does not improve radio signal strength by itself; performance depends on device placement and surrounding obstructions.
STARLINK ADAPTER REQUIRED
A Starlink dish cannot be secured directly to this universal antenna mast without a suitable model-specific pipe adapter, sold separately. Verify the exact Starlink terminal model, adapter fit and installation requirements. The dish and other electronic equipment are not included.
INSTALLATION AND WIND-SAFETY NOTES
-
Attach the main wall base to a structurally suitable surface using the correct anchors or fasteners.
-
Assemble the telescoping arm, 90-degree elbow and mast extensions in the chosen upward or downward orientation.
-
Install the diagonal support brace at a suitable second structural attachment point.
-
Align the mast, tighten all adjustment bolts and verify that connections remain secure without crushing the tubing.
-
Inspect the complete assembly and seal exterior penetrations as required.
Do not mount only to siding, gutters or decorative trim. Installation or use in winds exceeding Beaufort Force 6 is not recommended; do not use during severe weather. A universal maximum load rating is not claimed because safe capacity depends on the mounting surface, fasteners, geometry and attached equipment.
PRODUCT SPECIFICATIONS
Brand: EOQO
Product type: Adjustable long-eave antenna wall mount kit
Material: Painted iron
Nominal tube wall thickness: 1 mm
Main structure: Telescoping horizontal arm with 90-degree elbow
Reinforcement: Adjustable diagonal support brace
Mast configuration: Modular extension pipes
Installation options: Upward or downward, subject to mounting layout
Applications: Compatible TV antennas, wireless bridges, outdoor WiFi and weather stations
Starlink compatibility: Suitable model-specific adapter required; sold separately
BEFORE ORDERING
Check the actual wall-to-eave distance, mast clamp compatibility, available structural fixing points and package contents for this SKU. Installation hardware must match the mounting substrate.
-
ReferenceLong -Antenna-Bend-Mount-Brace-Black
-
In stock1000 Items
Secure Checkout & Data Protection
Fast & Reliable Worldwide Shipping
Easy Returns & Hassle-Free Support
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent